What should you watch when using a plasma cleaner?
Author： Shenzhen three and wave of Electrical and Mechanical Technology Co., LtdIssuing Time：2017-08-03 09:05:34Pageviews：3276【smallmediumbig】
Plasma plasmeter (plasmacleaner), also known as plasma surface treatment instrument, is a new high-tech technology, the use of plasma to achieve the conventional cleaning method can not achieve the effect. The plasma is a state of matter, also called the fourth state of matter. To exert sufficient energy on the gas to ...
Text label：
Plasma
plasmeter (plasmacleaner), also known as plasma surface treatment
instrument, is a new high-tech technology, the use of plasma to achieve
the conventional cleaning method can not achieve the effect. The plasma is a state of matter, also called the fourth state of matter. To exert sufficient energy on the gas to ionize it into a plasma state. The
"active" components of the plasma include: ions, electrons, reactive
groups, radionuclides (metastable) of excited states, photons, and the
like. The
plasma washer is the purpose of cleaning the surface by treating the
surface of the sample with the nature of these active components. Plasma
cleaning machines can be used for cleaning, etching, activation and
surface preparation, etc., can choose 40KHz, 13.56MHz and 2.45GHz three
radio frequency generator to meet the different cleaning efficiency and
cleaning effect needs. Plasma and solid, liquid or gas, is a state of matter, also known as the fourth state of matter. To exert sufficient energy on the gas to ionize it into a plasma state. The
"active" components of the plasma include: ions, electrons, reactive
groups, radionuclides (metastable) of excited states, photons, and the
like. The
plasma surface treatment instrument is the use of the nature of these
active components to deal with the sample surface, in order to achieve
cleaning, modification, photoresist ashes. Then the plasma cleaning machine in the running time should pay
attention to what matters? The following three and Podas to tell you
about it:
1, the correct set of plasma equipment operating parameters, on time equipment to use the instructions to implement;
2, to protect the plasma ignition device to ensure that the plasma cleaning machine can be normal start;
3, the plasma equipment in the preparatory work before the start, to
the relevant personnel training, and to ensure that the operation of the
plasma cleaning machine personnel in accordance with the requirements
of the strict implementation of the operation;
4, in a duct when there is no ventilation, the plasma generator
running time can not exceed the equipment manual above the time required
to prevent burning burner, resulting in unnecessary losses;
5, if you need to maintain the plasma equipment, please turn off the plasma generator and then the corresponding operation.
Plasma
processing equipment is widely used in plasma cleaning, etching, plasma
plating, plasma coating, plasma ashing and surface modification and
other occasions. Through
its treatment, can improve the wetting capacity of the material
surface, so that a variety of materials can be coated, plating and other
operations, enhance the adhesion, bonding force, while removing organic
pollutants, oil or grease.
2017-08-03
3276People browse
400 0061 1152CN
No public：
